Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Sealers and paint » Pavement sealers » Brukseal
sealers

Brukseal

brukseal

BRUKSEAL is a clear, light stable sealer designed to penetrate and harden the jointing sand of block paving to inhibit the growth of moss and weeds and to eliminate sand loss. Brukseal also seals the block paving to enhance the appearance whilst facilitating the easy removal of oil and other stains.

 

USES

BRUKSEAL is used for the sealing of block paving and other substrates such as paving slabs and pressed concrete, and for the stabilisation of jointing sand.

  • Reduces efflorescence
  • Eliminates sand loss from joints
  • Ultra violet and weather resistant
  • Enhances the colour of the block
  • Facilitates the easy removal of oil and other contamination
  • Inhibits the growth of moss and weeds

For professional use only.

 

Before sealing

brukseal1

After sealing

METHOD OF USE

Existing areas of block paving need to be cleaned with a high power water jet. Oil and other stains should also be removed prior to washing. The area should then be allowed to dry and the joints resanded and compacted to just below the level of the pavement with a suitable dried washed sand. All excess sand should be swept from the surface of the blocks. New installations need only to be swept clean ensuring there is sufficient well compacted sand in the joints.

 

TECHNICAL DATA

Drying time: Touch dry ? two hours at 20°c. Foot traffic may be permitted after twelve hours (at 20°c). Vehicles should be kept off the treated area for a minimum of 72 hrs.
Coverage: The average application rate is 4 m2 per litre. This will vary depending on the porosity of the blocks and the size of the joints.
Packaging: Brukseal is supplied in 20 and 5 1tr containers
Cleaning: All equipment should be cleaned immediately after use with xylene
Storage: Brukseal should be stored at room temperature and away from naked flames and food stuffs.
Safety: Brukseal is a flammable liquid, no naked flames should be allowed in the work area and good ventilation provided at all times. Suitable solvent resistant gloves should be worn when handling Brukseal. The substrate and jointing sand must be dry.


Apply Brukseal with a low pressure sprayer at a rate of 4m2 per litre. Do not return unused material to its original container as this will contaminate the remaining Brukseal.

 

 

  OUR CLIENTS

  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2019 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla m.st. Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: Intermedium.pl interactive agency