Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Reinforcing fibres » Steel fibres » Baumix 60

Baumix 60 | Steel fibers


Steel fibers for concrete reinforcement

Baumix 60 steel fibers for concreteBaumix 60 is shaped steel fiber 60 mm in length and 1 mm in diameter, made of hard-drawn low carbon steel wire.


Steel fiber zoomed


  • For the reinforcement of industrial floors and pavements
  • For the reinforcement of prefabricated concrete products:
    • small garden structures
    • tunnels
    • oil tanks
    • septic tanks
    • well rings, etc.
  • No need for traditional mesh reinforcement.

For professional use only.


  • hook end make for strong mechanical anchorage in the concrete
  • high stenderness
  • high tensile strength
  • efficient elimination of cracks and fractures
  • increasing the strength parameters of concrete
  • high degree resistance to fatigue
  • quick and easy application
  • concrete slab thickness reduction
  • high impact resistance against static and dynamic loading

Baumix 60 steel fibers are to be dosed at a rate of 15 - 40 kg per cubic meter of concrete. The most common amount for industrial floors and pavements is 20 kg/m3. When applied at a rate of 20 kg/m3 or below, then Baucon polyprophylene fiber is to be used simultaneously at a rate of 0,6 kg/m3.


Mixing with concrete

Concrete plant

  • never add fibers as first component to the mixer
  • fibers shoud be added after sand and aggregates but before cement water and (super)plasticizer
In truckmixer
  • adjust slump to a minimum of 12 cm - preferably with (super)plasticizer
  • put mixer on maximum drum speed: 12-18 rpm
  • after adding the fibers, continue mixing at highest speed for 4-5 min.

pdf Baumix 60 steel fibers datasheet



Steel fibre dimensions 

d - diameter, 1,0 mm
l – length, 60 mm
λ - slenderness


Supplemental information
All the information herein refers to products stored and used according to our recommendations, has been presented in good faith and takes into account the current state of knowledge and experience of BAUTECH. You are obliged to use the product in accordance with its intended purpose and BAUTECH’s recommendations. All the technical information provided is based on laboratory tests and trials. Out‐of‐laboratory tests may give different results due to the conditions, location, manner of application and other circumstances that are out of BAUTECH’s control. Any different recommendations issued by our employees must be made in writing; otherwise, they shall be deemed null and void. These instructions replace all the previous ones and make them void.

20 kg boxes; pallets 50 x 20 kg = 1000 kg


In undamaged, originally sealed containers, in dry conditions and ventilated rooms.


Technical data
Conforms to EN 14889-1
Group I
Length approx. 60 mm
Diameter approx. 1,0 mm
Shape formed
Tensile strength average 1020 N/mm2
min. 900 N/mm2
Modulus of elasticity min. 180 GPa
Consistency of concrete with 15 kg/m3 of fibres VeBe 8 s
Effect on concrete strength 15 kg/m3 to obtain 
1,5 N/mm2 at CMOD=0,5 mm and 1,0 N/mm2 at CMOD=3,5 mm

CE Włókna stalowe

EN 14889-1:2006



Steel fibres

Baumix® steel fibres





Summary: steel fibres, concrete reinforcement, armouring, fibre, steel


  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2020 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: interactive agency