Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Epoxy resin floors » Renovation Baupox 100 GP epoxy resin, concrete surfaces
Epoxy resin floors

Renovation Baupox 100 GP epoxy resin, concrete surfaces

Colourless, deeply‐penetrating epoxy agent for repairing concrete surfaces

 

Concrete renovation resin

BAUPOX 100GP is a two‐component, colourless, deeply‐penetrating agent on the basis of epoxy resins.

 

USE

  • Strengthening and sealing of concrete foundations and cement screeds.
  • As an anti‐dusting agent for industrial floors subject to intensive activity of external factors.

For professional use only.

 

PROPERTIES

  • Very good penetration
  • Very low viscosity
  • Easy application

 

FOUNDATION

Concrete foundation must be stable and of proper carrying capacity for the target static and dynamic loads – concrete of class no less than C20/25 of minimal stripping strength 1,5 N/mm2. The accept‐able humidity of the foundation must not exceed 4% in terms of weight.

The foundation must have a hermetic horizontal insulation protect‐ing it from moisture sucked up through capillary tubes.

Foundations which are to be protected with epoxy layers must be clean and absorbent.

 

CONDITIONS OF APPLICATION

  • Temperature of the foundation– no less than +10°C
  • Relative humidity of the air – max. 75%

NOTE: Special attention should be paid that the temperature of the foundation be at least 3°C over the dew point.

Rooms in which the works are performed must be ventilated.

MIXING

BAUPOX® 100 GP is provided in original boxes where the amount of component A (resin) corresponds chemically to the amount of com‐ponent B (hardener). Depending on the final use, the material should be prepared in proper amounts. The indicated weight propor‐tions must be observed at all times.

After adding component B to component A mix it all thoroughly with a slow‐speed mixer (max.400 revolutions per minute) until a ho‐mogenous mixture is achieved (about 3‐5 minutes).

 

APPLICATION

Apply BAUPOX 100 GP with a roller or brush. Pay attention that no puddles of the preparation be left on the floor.

PROCESSING SUITABILITY

At the temperature of 20°C and at the relative air humidity of 60‐70%, the material remains suitable for use for 25‐30 minutes after mixing.

  • Increasing the temperature shortens the setting time of the resin and lowers its viscosity.
  • Lowering the temperature prolongs the setting time of the resin and increases its viscosity.

 

 

pdf Datasheet: resin for concrete repairing

 

Order

 

USABILITY

At the temperature of 20°C and relative air humidity of 60‐70%:

  • pedestrian traffic – after 24 hours
  • mechanical loads – after 72 hours
  • complete resistance – after 7 days

 

PACKAGING

10 kg, 20 kg

MISCELLANEOUS INFORMATION

All the information contained herein refers to products stored and used in accordance with our recommendations. They have been presented in good faith and take into account the current state of knowledge and experience possessed by Bautech. You are obliged to use the product in accordance with its intended purpose and Bautech’s recommendations. All the technical in‐formation provided herein is based on laboratory tests and trials. Out‐of‐laboratory tests may give different results due to the con‐ditions, location, manner of application and other circumstances that are out of Bautech’s control. Any different recommenda‐tions issued by our employees require a written form, on pain of nullity. These instructions replace all the previous ones and make them void.

In case of adverse humidity and temperature conditions, heaters and/or air driers must be used.

 

STORAGE

6 months from the date of production specified on the packaging, when stored on pallets in originally closed packaging and at the tem‐perature from +10 to 25°C.

CLEANING

Tools as well as possible stains should be cleaned when still fresh with acetone.

SAFETY MEASURES

BAUPOX® 100 GP is classified as a dangerous material. Guidelines as to the safety of work are included in the specification sheet of dan‐gerous chemical preparations.

 

TECHNICAL DATA

Product compliant with EN-13813

Mixing proportions

(component A – component B)

100 : 13  in terms of weight

Density

approx. 0,99 g/cm3

Consumption 0,2 - 0,3 kg/m2

Colour

colourless, transparent


Usability time at
+20°C - 100g


approx. 25 min.


Adhesion after 28 days


over 1,5 N/mm2 (B1,5)


Application temperature


from +10°C to +25°C

Temperature of the foundation at least 3 °C over the dew point

CE


09

EN 13813

SR-B1,5


 

Order

 

 

Summary: concrete, renovation, resin, penetrating, agent, anti dusting, industrial, flooring

  OUR CLIENTS

  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2019 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla m.st. Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: Intermedium.pl interactive agency