Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Decorative polished screeds Terrafloor » Primers and bonding mortars » Baubond
Polished decorative floors

Baubond

baubond

BAUBOND is used for making an adhesive layer, which bridges tensions between the old concrete surfacing and a thin-layer concrete flooring. Flooring Screed.





 

PROPERTIES

BAUBOND is a single-component preparation based on modified cement polymer. It forms a highly effective adhesive layer. It is characterised by high adhesion to concrete, also when the structure is under water load.

For professional use only.

 

mixing

The measured quantity of clean water (8.3 l) shall be poured into a clean vessel. Then the entire contents of the BAUBOND bag should be emptied into water, with simultaneous mixing for minimum 5 minutes with a mixer mounted on a slow rotation drill (400 rotations/minute). A homogenous mixture should be achieved (without lumps), which may thicken a little. The suspension should have adequate viscosity to allow desired spreading. During application it should be mixed from time to time.

The concrete surface shall be free of any contamination and loose parts, and the existing cracks and losses shall be repaired. The base may not be frozen. It is necessary to remove from the surface any oil stains etc., as well as tyre marks or surface markings. Concrete fragments with corrosion (e.g. chloride corrosion) are to be removed. Damage to concrete caused by corroding reinforcing steel shall be broken away, and all damages and loose parts removed.

If possible the surrounding areas of reinforcing shall be uncovered and rust is to be removed. Ripping strength of the surface layer may not be lower than 1.5 N/mm2. The base may be prepared by shot blasting, milling or pressurised water jet, etc.  It is not permissible to allow poodles. The BAUBOND suspension is applied using a brush.

en_baubond

TECHNICAL DATA

Form and colour: grey powder
Pouring density: ca. 1.1 kg/dm3
Processing time: ca. 45 minutes at 20°C (to be mixed frequently)
Processing temperature: from 5°C to 35°C
(air, material and base)
Usage: 1,5 to 2,5 kg/m2
Mixing proportions:
25 kg powder: 8.3 l of clean water
Package: 25 kg bags
Storage: 6 months in a dry and cool facility in original untouched packaging.
Safety: The mixture contains cement. Eyes and hands to be protected. Tools to be cleaned with water.

  OUR CLIENTS

  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2019 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla m.st. Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: Intermedium.pl interactive agency