Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Decorative paving » Surface materials » Multitop Vertical
Decorative wall layer. Sculptures made of concrete

Multitop Vertical - Cement‐polymer decorative wall layer

MULTITOP VERTICAL

Cement‐polymer decorative wall layer


dry shake topping decorative wall layer, bag

MULTITOP® VERTICAL is mineral layer for making wall facings imitating stone, wood, brick etc. It contains hard aggregate, high‐performance cements and proper admixtures and pigments. When applied on the foundation, it creates a coloured, long‐lasting, very hard and smooth surface which may be modelled and in which shapes may be impressed.

 

 

 

 wall low relief 

 

USE

Making of decorative, impressed wall facings indoors on concrete foundations and light construction materials such as: gravelite blocks, gas concrete blocks, structural clay tiles, foundations from expanded polystyrene etc. and out‐doors only on non‐absorbable foundations.

For professional use only.

 

PRODUCT CHARACTERISTICS
  • To be used indoors and outdoors
  • Numerous possibilities of impressing and forming
  • Simple, one‐time application
  • Wide palette of colours
  • Easy to keep clean
  • To be used in wet and damp rooms
  • Very good adhesion to foundation
  • Steam permeability
 
PREPARATION OF FOUNDATION

Foundation must be stable, strong, clean, dry, free from impurities and layers that are loosely bound with the foundation or decrease binding (grease, glues, bitumens, dust, remains of paints and mortars, anti‐adhesion agents etc.). All larger defects, joints, installation slots etc. must be filled with cement/lime mortar. Apply glue on the foundation and submerge in it net, for example from glass fibre. After no less than 12 hours apply bonding layer BAUBOND in accordance with the technical sheet of the product and apply wall layer MULTITOP VERTICAL with the wet‐on‐wet method.

 

APPLICATION CONDITIONS

The temperature of the ambient and foundation during the works and for the next 7 days should be between +5°C and +25°C. The surface made should be protected from losing water too quickly as a result of, for example, high temperatures, draught, sunlight operation etc. In order to ensure high quality and uniform colour, all works should be performed with suitable tools in an area protected from dust, EPS balls and similar impurities.

 

PREPARATION OF MORTAR

Mix MULTITOP VERTICAL with water in mixers or using an electric stirrer (or also a slow‐speed drill with a mixer) – to about 6.75 l of clean water add 30 kg (a bag) of dry mixture and mix for at least 2‐3 minutes until a homogenous mass with no lumps is obtained. It is not permitted to “improve” the product by adding sand, cement etc. Permitted are slight colour modifications (max. 2% of the weight of MULTITOP VERTICAL).

pdf Cement‐polymer decorative wall layer technical sheet

 

 

Application

Wall concrete decoration finishing

Apply MULTITOP VERTICAL in a single layer, using the wet‐to‐wet method. Thickness of the layer performed in this manner should be 10‐20 mm. Level the thrown mortar and level out using a long float. If a thicker layer has to be applied, another layer 10‐20 mm thick may be applied on the first one which is slightly hardened but still wet.

After partial hardening spray liquid separator on the surface and impress the needed pattern. In places where the foundation material changes (e.g. con‐crete‐brick) and on unstable foundations it is necessary to use reinforcement net from glass fibre, tinned spot‐welded steel net (eye 20 x 20 mm, Ø 1 mm) or ceramic net.

In all convex corners of the walls and window/door openings it is recom‐mended to use reinforcement net or curved corners. On large areas expan‐sion joints should be used. Fresh stains from the mortar wash with water, hardened ones remove mechanically.

Impressed, hardened surface may be additionally dyed with proper liquid dyes BAUTINT.

Impregnate the made surface with BAUSEAL ENDURO.

HEALTH AND SAFETY PRECAUTION

The mixture contains cement ‐ mixed with water gives an alkaline reac‐tion. Avoid breathing, protect eyes and skin. In case of contaminations: clean eyes with plenty of water, wash skin with soap and water. Working areas should be ventilated. Keep away from the children.

MISCELLANEOUS INFORMATION

All the information herein refers to products stored and used according to our recommendations, has been presented in good faith and takes into account the current state of knowledge and experience of BAUTECH. You are obliged to use the product in accordance with its intended pur‐pose and BAUTECH’s recommendations. All the technical information provided is based on laboratory tests and trials. Out‐of‐laboratory tests may give different results due to the conditions, location, manner of application and other circumstances that are out of BAUTECH’s control. Any different recommendations issued by our employees must be made in writing; otherwise, they shall be deemed null and void. These instruc‐tions replace all the previous ones and make them void.

The ready built surface may show differences in the shade and appearance, depending on the conditions and manner of performing works, drying conditions etc. This is not a defect of the product and does not influence the technical parameters and functional properties of the floor. Colour diversification of the floor may also result from non‐homogenous concrete foundation.

 

PACKAGING

30 kg bags, pallet 35 x 30 kg = 1050 kg

STORAGE

6 months from the date on the packaging, if stored in original, tightly closed packaging, in ventilated rooms, at the temperature between 5°C and 25°C.

TECHNICAL DATA

Fire rating

A1

Capillary absorption

W0

Vapour permeability ratio

max 20 μ

Adhesion

min. 1 N/mm2

Adhesion after 15 freezing cycles

min. 1 N/mm2

Application temperature

from +5°C to +25°C

CE

Product compliant with EN 998-1

Tags: decorative wall layer, cement, stone, wood, brick imitation with concrete

  OUR CLIENTS

  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2019 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla m.st. Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: Intermedium.pl interactive agency