Bautech Industrial and Decorative Flooring
Other countries
Polish (Poland)English (United Kingdom)Russian (CIS)
Home page » Industrial » Systems & products » Hardened concrete floors » Reinforcing fibres » Baucon
Hardened concrete floors

Baucon Polypropylene Fibres


BAUCON Fibrillated Polypropylene Fibre is product which can be incorporated into concrete mixtures to minimize cracking due to the inherent shrinkage of concrete. BAUCON Fibres can also increase the impact resistance and toughness (the ability to absorb energy), therefore reducing rejected product


BAUCON Polypropylene Fibre can be used as secon- dary reinforcement to reduce plastic and hardened concrete shrinkage while improving the toughness of the substrate. The 12 mm length of the fibres provides excellent secondary reinforcement to the concrete while having minimal affect on the apparent slump of the mixture.

For professional use only.



BAUCON Polypropylene Fibre can be added with the coarse and fine aggregates at the central batch facility, or directly into the truck mixer at the jobsite.When BAUCON Fibre is added at the jobsite to the mixer drum,the user should mix the fiber into the concrete for five minutes before discharge.If the mixing drum is loaded at less than 50%of its rated capacity,arrange for the concrete to be drawn near the back of the mixer before introducing the bags of fiber.

If the slump of the concrete is to be measured, the measurement should be made prior to the introduction of fibre,or the inspector should be made aware that the apparent slump measured for fibre reinforced concrete measures lower than for non-fibre reinforced concrete. The fibre reinforced concrete will be placeable by conventional methods;however,the apparent stiffness of the material may cause construction workers to want to add unnecessary water to the mixture.This should be avoided.

If more plasticity is required,use of (super)plasticizer is recommended. If concrete cylinder specimens are cast for evaluating concrete strength,the specimens should be externally vibrated and not tamped.

1 - with polypropylene fibres
2 - w/o polypropylene fibres

The recommended dosage rate for BAUCON Fibrillated Polypropylene Fibre is an 0,6 kg bag per m3.

Type of fiber: Polypropylene
Specific Gravity: 0.91 g/cm3
Length: 12 mm
Diameter: 18,7 ?m
Specific surface 2 350 cm2/g
Tensile strength 350 N/mm2
Young ?s Modulus 3500 N/mm2
Absorbability 0%
Deformation Point 145oC
Alkali Resistance: Excellent
Packaging 0.6 kg bags


  • logos_01-07.jpg
  • logos_02-06.jpg
  • logos_03.jpg
  • logos_04-05.jpg
  • logos_04.jpg
  • logos_05.jpg
  • logos_06.jpg
  • logos_11.jpg
  • logos_12.jpg
  • logos_17.jpg
  • logos_19-19.jpg
  • logos_19-23.jpg
  • logos_19-24.jpg
  • logos_19.jpg
  • logos_21.jpg
  • logos_22.jpg
  • logos_26.jpg
  • logos_27-32.jpg
  • logos_27.jpg
  • logos_29-34.jpg
  • logos_29.jpg
  • logos_30.jpg
  • logos_36.jpg
  • logos_38.jpg
  • logos_39-43.jpg
  • logos_39.jpg
  • logos_40.jpg
  • logos_42.jpg

Call Phone +48 22 716 77 91

Contact details

© 2021 All right reserved. BAUTECH sp. z o.o. ul. Staszica 25, 05-500 Piaseczno k. Warszawy tel. 22 716-77-91, fax 22 716-77-90, NIP 522-000-09-96, Regon: 012547108, KRS nr 0000166495 Sąd Rejonowy dla Warszawy, XIV Wydział Gospodarczy KRS, share capital: 51 000 PLN, bank account PKO BP S.A. 57 1020 1068 0000 1502 0146 4957

project by: interactive agency